Filter
Top Products
8 PARAGON II USER GUIDE
Start-Up Display:
When a Paragon II unit is powered ON, it performs a start-up test. It checks each channel and
user port to ensure proper operation.
Normal Display:
After start-up test, LCD panel displays two lines of messages:
1. Line 1: Running message: “Raritan Computer Paragon II: Paragon832/1 Ready”
For a Paragon II unit model P2-UMT832M, “Paragon832” is the default name of the Matrix
Switching Unit (this name may be changed through the System Configuration Menu).
2. Line 2: User port status message: “A/N User (1, 2, 3 …) → None”
User port status displays a scrolling status of all user ports, one user port per second. The
User’s active channel, 1 through 128, is displayed after the user port number.
Raritan Computer Paragon II: Paragon832/1
Ready
A User (1, 2, 3 … 8) → None
A=Active User # 1-8
- OR -
Raritan Computer Paragon II: Paragon832/1
Ready
N User (1, 2, 3, … 8) → None
N=Non-Active User # 1-8
Figure 8 LCD Normal Display
Power Up Option:
If you hold down the FUNC button on the front panel of the Paragon II unit during Power Up, the
Paragon II unit will clear its database and reset to factory defaults. Confirm functions by pressing
the ENT button on the front panel.
When “Clear Database Hit Ent/ESC?” appears on the LCD, press the ESC button if you want to
exit the screen without clearing the database. To clear the database, press the ENT button; “Clear
All?” appears on the LCD. If you press the ESC button once more, the channel configuration
will be cleared and will be rebuilt later by the UMT. This is called a Partial Reset. However, if
you press the ENT button, both the channel configuration and the user profile and system settings
will be cleared.
Clear Database
Hit Ent/ESC?
Figure 9 Power Up Clear Database