CHAPTER 6: CONFIGURATIONS 77
Diamond Configuration
The following procedure must be followed to ensure this configuration functions properly:
− After re-connection, all UMT Matrix Switches should undergo a FUNC reset to clear the
switch database. This procedure should be performed starting from the third tier device
down to the base unit.
− Execute the FUNC reset in the following order: UMT-3A → UMT-2A → UMT-2B →
UMT-Base 1.
Figure 70 Diamond Configuration
UMT
-
UMT
-
3A
UMT
-
3B
UMT
-
2B
UMT
-
2A