Filter
Top Products
CHAPTER 5: PARAGON II AND Z-CIMS 67
8. Press ENTER and type SetPZSize-NN (a dash, followed by the two-digit number for the size
of your chain, from 01-42).
Figure 57 Resize the P2ZCIM Chain
9. Press ENTER.
10. Press S to save the new chain size.
11. Go to the Channel Configuration screen and confirm that the chain size has changed.
Refresh a P2ZCIM Chain:
The Refresh command resets the Communication Addresses of the P2ZCIMs to factory default.
Refreshing the chain will reassign all Communication Addresses sequentially.
1. At a User Station Login Menu, type admin in the User Name field and press ENTER.
2. Type raritan or your new password in the Password field and press ENTER.
3. Go to the Channel View screen (view selection by channel).
4. Press the Home key.
5. Press the F5 key.
6. Go to the Channel Configuration screen.
7. Use the Ç and È or the Page Up and Page Down keys to select the P2ZCIM chain you wish
to refresh.
8. Press ENTER and type RefreshPZ.
Figure 58 Refresh the P2ZCIM Chain