Renesas HS2378KCM01H Network Card User Manual


 
132
Table 6.13 [Bus status] Group Box Options
Option Description
[Don’t care] check box Indicates that no bus condition is set.
[DMAC] check box Sets a DMAC bus cycle as a display condition.
[DTC] check box Sets a DTC bus cycle as a display condition.
[PROG] check box Sets a CPU instruction fetch cycle as a display condition.
[DATA] check box Sets a CPU data access cycle as a display condition.
[REFRESH] check box Sets a refresh cycle as a display condition.
Table 6.14 [Area] Group Box Options
Option Description
[Don’t care] check box Indicates that no area condition is set.
[ROM] check box Sets a ROM area as a display condition.
[RAM] check box Sets a RAM area as a display condition.
[IO-8] check box Sets an 8-bit I/O area as a display condition.
[IO-16] check box Sets a 16-bit I/O area as a display condition.
[EXT-8] check box Sets an 8-bit external area as a display condition.
[EXT-16] check box Sets a 16-bit external area as a display condition.
[DTC] check box Sets a DTC area as a display condition.
Table 6.15 [Read/Write] Group Box Options
Option Description
[Don’t care] check box Indicates that no read/write condition is set.
[Read] radio button Sets a read cycle as a display condition.
[Write] radio button Sets a write cycle as a display condition.
Table 6.16 [IRQ] Group Box Options
Option Description
[Don’t care] check box Indicates that no IRQ condition is set.
[High] radio button Sets the high level of IRQ as a display condition.
[Low] radio button Sets the low level of IRQ as a display condition.