Filter
Top Products
M306H7T3-RPD-E User’s Manual 2. Setup
REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 24 of 88
2.4.2 Connecting the FLX120-RPD to the Emulation Pod
Figure 2.3 shows how to connect the FLX120-RPD and the emulation pod.
Figure 2.3 Connecting the FLX120-RPD to the emulation pod
CAUTION
Note on Connecting the Cable:
Always shut OFF power before connecting the emulation pod and the FLX120-RPD. Otherwise, the
internal circuits may be damaged.
IMPORTANT
Note on Securing the Screws:
After connecting the emulation pod and the FLX120-RPD, be sure to secure the screws mounted in both
sides of the connector cover
FLX120-RPD (Secure with the screws)
Emulation pod