Filter
Top Products
M306H7T3-RPD-E User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0964-0100 Rev.1.00 August 01, 2005 Page 62 of 88
(3) When DATA ACCESS is selected
1) Window for setting the address
Setting the address
Sets the address by “Address” tab.
You can set eight conditions, e.g., a specified address, a specified address
range, etc.
2) Window for setting data
Setting data
Sets the address by “Data” tab.
You can set eight conditions, e.g., specified data, specified data range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and read/write. When you have
finished setting the data and access condition, click OK.