Filter
Top Products
Troubleshooting
190
4
To adjust the paper size to one
not available with the paper size
selector
A Set the paper size selector to
the p
pp
p mark on the left.
B Press the {
{{
{User Tools/Counter}
}}
}
key.
C Press the [System Settings] key.
D Press the [Paper Size Setting] key.
E Press the [
Tray Paper Size: Tray 1
]
or the [Tray Paper Size: Tray 2]
key.
F Select your desired size. Then,
press the [OK] key.
G Press the [Exit] key or press the
{
{{
{User Tools/Counter}
}}
} key to exit
the User Tools.
Important
❒ Be sure to select the paper
size with the User Tools (Sys-
tem Settings). Otherwise,
misfeeds might occur.
Reference
For details, ⇒ “User Tools
(System Settings)” in the Sys-
tem Settings manual.
J
Gently push the paper tray in un-
til it stops.
K
Check the paper size displayed
on the display panel.
Changing the Paper Size in
Tray 3 or 4
A
Make sure that the paper tray is
not being used.
B
Pull the paper tray out, and then
lift and remove it.
Note
❒ Remove any remaining copy
paper.
C
Remove the screws fastening the
side fences using the screwdriver.
Note
❒ A screwdriver is contained in
the front area of the top tray.
AdonisC2_AEcopy110F_FM.book Page 190 Wednesday, October 3, 2001 1:43 PM