Filter
Top Products
Copying from the Bypass Tray
61
2
B
Lightly insert the OHP transpar-
encies or thick paper face down
until the beeper sounds.
The k indicator on the display au-
tomatically goes on.
Important
❒ When you set an OHP transpar-
ency, make sure that its front
and back faces are properly po-
sitioned.
❒ To avoid paper misfeeds, fan
the paper before setting it in the
tray.
C
Press the {
{{
{#}
}}
} key.
D
Select [OHP Sheet] or [Thick Paper].
E
Press the [OK] key.
F
Set your originals and press the
{
{{
{Start}
}}
} key.
Important
❒ When copying onto OHP trans-
parencies, remove copied sheets
one by one.
G
When your copy job is finished,
press the {
{{
{Clear Modes}
}}
} key to
clear the settings.
AdonisC2_AEcopy110F_FM.book Page 61 Wednesday, October 3, 2001 1:43 PM