Ricoh 1045 All in One Printer User Manual


 
15
1. Basics
Turning On the Power
To turn the machine on, press the op-
eration switch.
Note
This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. P.28 Auto Off and
Timer Setting in the System Set-
tings manual.
-
--
-Power switches
This machine has two power switch-
es. P.5 Guide To Components
Operation switch (right side of the
control panel)
Press this switch to activate the
machine. When the machine has
warmed up, you can make copies.
Turning On the Main Power
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B
Open the switch cover and turn
on the main power switch (make
sure that the Main Power indica-
tor goes on).
Important
Do not switch off the main pow-
er immediately after it has been
switched on. Failure to observe
this may result in damage to the
hard disk or memory, leading to
malfunctions.
AdonisC2_AEcopy110F_FM.book Page 15 Wednesday, October 3, 2001 1:43 PM