Ricoh 1045 All in One Printer User Manual


 
Setting Originals
33
2
A
Press the [Special Original] key.
B
Press the [Mixed size] key.
C
Press the [OK] key.
D
Align the rear and left edges of
the originals as shown in the il-
lustration.
1: Set into the document feeder.
2: Vertical size
E
Adjust the guide to the widest
original size.
F
Set the aligned originals face up
into the document feeder.
G
Press the {
{{
{Start}
}}
} key.
Setting Custom Size Originals
When setting custom size originals in
the document feeder, specify the size
of the originals.
Limitation
The paper size that can be set with this
function is vertical 128-297mm (5"
11"), horizontal 128-1,260mm (5" 49").
A
Press the [Special Original] key.
B
Press the [Custm Size Origi.] key.
C
Enter the horizontal size of the
original with the Number keys,
then press the [
#
] key.
Note
If you make a mistake, press the
[Clear] or {Clear/Stop} key, and
then enter the value again.
B4
A3
1
2
CP19AE
AdonisC2_AEcopy110F_FM.book Page 33 Wednesday, October 3, 2001 1:43 PM