Filter
Top Products
User Tools (Copy/Document Server Features)
226
5
Input/Output
❖
❖❖
❖ Switch to Batch (SADF)
You can select Batch mode or SADF mode when you press the Special Origi-
nal key.
❖
❖❖
❖ SADF Auto Reset
When you set one original at a time in the document feeder, the Auto Feed
indicator lights for a selected time after an original is fed to show that the doc-
ument feeder is ready for another original. You can adjust this time from 3
seconds to 99.
Note
❒ Default: 5sec.
❖
❖❖
❖ Rotate Sort: Auto Paper Continue
You can specify whether to continue copying when the paper of the required
orientation has run out during rotate-sorting.
⇒
“Rotate Sort” in
⇒
P.43 “Sort”.
• If you select [No]:
When paper of the required orientation runs out, the machine stops copy-
ing and prompts you to supply copy paper. When you load paper, the ma-
chine will continue copying.
• If you select [Yes]:
Copying continues using copy paper of a different direction. The copy job
will finish even if you have left the machine.
Note
❒ Default: No
❖
❖❖
❖ Auto Sort
You can specify whether Sort mode is selected when the machine is turned on
or the mode is cleared.
Note
❒ Default: No
❖
❖❖
❖ Memory Full Auto Scan Restart
When the memory becomes full while scanning originals, the machine can
make copies of the scanned originals first, then automatically proceed scan-
ning the remaining originals.
You can enable or disable this function.
• If you select [No]:
When the memory becomes full, the machine stops operation allowing you
to remove the copy pages delivered on the output tray.
• If you select [Yes]:
You can leave the machine unattended to make all the copies, but the re-
sulting sorted pages will not be sequential.
Note
❒ Default: No
AdonisC2_AEcopy110F_FM.book Page 226 Wednesday, October 3, 2001 1:43 PM