Ricoh 2000 Fax Machine User Manual


 
Fax via Computer
170
5
Confirming Transmission Results by E-mail
After communicating in the LAN-Fax mode, this function transmits the commu-
nication results with the computer by e-mail.
Important
To confirm transmission results by e-mail, the optional printer/scanner unit
must be installed.
When you have done [Send] or [Send & Print] using the LAN-Fax, and when the
communication was successful, it transmits e-mail of the transmission result.
Result notification e-mail is sent when printing is complete, or if an error occurs
during communication between this machine and a computer.
A Click the [E-mail Settings] tab.
B Select the [Notify] check box under [E-mail TX results].
C Enter the destination.
When entering the e-mail address directly, click the [Specify destinations] radio
button, and then enter the e-mail address in the [Specify destinations] field.
When entering the machine's programmed address, click the [Device Address]
radio button, and then enter the registration number of the destination list in
the [Device Address] box.
The [Device Address] box is unavailable when [Specify destinations] is selected,
and you cannot enter anything in the text box.
D Click [Send] or [Send & Print].
Note
You can confirm transmission results using the E-mail TX Result function
and the Communication Result Report. You can set whether to use both of
these together in User Parameters (switch 10, bit 6) in the Fax Features
menu.
If there be any insufficient configurations in the e-mail menu on this ma-
chine, or if “Auto Specify Sender Name” is set to “Off”, the LAN-Fax result
notification e-mail is not transmitted, and the LAN-Fax Result Report is
printed. See “System Settings”, General Settings Guide for the e-mail set-
tings, and see “LAN-Fax Result Report” for the LAN-Fax Result Report.
Reference
p.146 “Communication Result Report (Memory Transmission)”
p.171 “LAN-Fax Result Report”
“System Settings”, General Settings Guide
“Fax Features”, General Settings Guide