Samsung ML2165WXAA Printer User Manual


 
Wireless network setup
112
2. Using a network-connected machine
If wireless network set up has been set before, the Wireless Network
Setting Information window appears.
If you want to reset the wireless settings, check the check box and click
Next.
For models that support the WPS button (without a USB cable
connection), the window shown below will appear.
-With a USB Cable: Connect the USB cable and click Next, then go to
step 7.
-Using the WPS Button: See "Access point via WPS button (without a
USB cable connection)" on page 115.
7
Select the method to use from the wireless set up method window.
Configure the wireless settings manually.: Go to step 8.
Configure the wireless settings by pressing the WPS button on the
access point.: Connect to the wireless network by press the WPS
button on the access point (or wireless router).
-Follow the instructions in the window. When you are done
configuring the wireless network settings, go to step 11.
8
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.