Filter
Top Products
2.6
Getting started
Setting up your fax number and name
Your fax number and name will be printed at the top of each page sent
from your machine.
1. Press Setup on the control panel. The display shows the first setup
menu; FAX NUMBER/NAME.
2. Press Start/Enter to access the Fax Number/Name menu. The display
shows ‘FAX NUMBER’.
3. Press Start/Enter. The displays asks you to enter the telephone
number.
If there is a number or name already set, the number or name appears.
4. Enter the telephone number which your machine is connected to. You
can include + and - symbol in the phone number by pressing and #
button respectively.
If you make a mistake, press
➛
or
❿
to move the cursor under the
wrong digit, then enter the correct number to change or press
Search/Delete to delete the number.
5. Press Start/Enter when the number on the display is correct.
The display asks you to enter your name.
6. Enter your name using number keypad.
You can enter alphanumeric characters using the number keypad, and
include special symbols by pressing 0 repeatedly.
For details on how to use the number keypad to enter alphanumeric
characters, see page 2.3.
If you want to enter the same letter or number in succession (e.g. SS,
AA, 777), enter one digit, then move the cursor by pressing the
❿!
but-
ton, and enter the next digit.
If you want to insert a space in the name, you can also use the
❿
but-
ton to move the cursor to skip the position.
7. Press Start/Enter when the name on the display is correct.
03-Getting Started 2000/04/03 3:20 PM Page 7