Filter
Top Products
3.15
Basic operation
3. The display asks you to enter a name. Enter the desired name. For
information on how to enter names, see page 2.3.
Or
If you do not want to assign a name, skip this step.
If you assign a name to the number, the name appears on the display
when you press the one-touch button.
4. Press Start/Enter when the name appears correctly or without enter-
ing a name.
5. To set another one-touch number, press the desired one-touch button
and repeat steps 2 through 4.
Or
To return to standby mode, press Stop.
Editing a number for one-touch dialing
If you press and hold the one-touch button where the phone number is
already registered, the display shows the number.
Press
➛!
or
❿
to move the cursor to the desired number and edit the
number. When you complete editing, press Start/Enter.
Note: When you press the one-touch button stored for group dial, the display
briefly shows ‘G-REGISTERED’ to indicate that the button is used for
group dial, then you can edit the number.
Sending a fax using a one-touch number
1. Load a document you want to send by fax.
2. Press the one-touch button (1 through 10) where you stored a number.
The number will be automatically dialled, then the document begins to
transmit when the remote fax machine answers the phone.
TEL:0
25413000
04-Basic 2000/04/03 3:16 PM Page 17