Filter
Top Products
4.2
Advanced fax
Delayed fax
You can set your machine to send a fax at a later time when you will not
be present.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.2.
2. Press Advanced FAX on the control panel.
The display shows the first menu; BROADCASTING.
3. Press
➛
or
❿
until ‘DELAYED FAX’ appears, then press Start/Enter.
4. Enter the number of the remote machine, then press Start/Enter.
To enter the number, you can also press a one-touch button including
Group dial button. Otherwise, press Speed, enter a 2-digit speed dial
number, then press Start/Enter. The stored number appears on the
display.
5. Press Start/Enter to confirm the number. The display asks you to
enter another fax number to send the document to another location.
Note: If ‘MEMORY FULL’ occurs while scanning into the memory, the display
will show:
Press
➛
or
❿
to select the option you want. If you select CANCEL,
broadcasting is cancelled. If you select DONE, your machine performs
broadcasting only with the pages already scanned.
If an error occurs while sending to a specific number, the machine trans-
mits the document to all the other numbers, then retries the number that
previously recorded an error. After completing transmission, your machine
prints the multi-communication report.
JOB
❿
CANCEL
❿
DONE
05-Advanced 2000/04/03 3:11 PM Page 4