Filter
Top Products
Maintenance
Cleaning the OPC drum
If you are getting streaks or spots on your print, you may clean the OPC
drum.
1. Make sure that the paper is loaded.
2. Press Setup on the control panel.
The display shows the first setup menu; FAX NUMBER/NAME.
3. Press
➛
or
❿
until ‘MAINTENANCE’ appears, then press
Start/Enter.
4. Press
➛
or
❿
until you find ‘CLEAN DRUM’, then press Start/Enter.
The machine automatically pulls in a sheet of paper, and prints it out.
The toner particles on the OPC drum surface are fixed to the paper.
5. Press Stop to return to standby mode.
6.9
Troubleshooting
08-Maintenance 2000/04/03 2:58 PM Page 1