3.17
Basic operation
Editing a number for speed dialing
1. Press and hold Speed for 2 seconds.
2. Enter the 2-digit location number where the phone number you want
to edit has been stored, then press Start/Enter. The display shows the
number.
3. Press
➛!
or
❿
to move the cursor to the desired number and edit the
number. When you complete editing, press Start/Enter.
Note: When you press the speed dial number stored for group dial, the display
briefly shows ‘G-REGISTERED’ to indicate that the number is used for
group dial, then you can edit the number.
Sending a fax using a speed number
1. Load a document that you want to send by fax.
2. Press Speed, then enter a 2-digit speed dial location number.
3. Press Start/Enter to dial the number. The number will be automatical-
ly dialled, then the document will begin to be transmitted when the
remote fax machine answers the phone.
TEL:025413000
04-Basic 2000/04/03 3:16 PM Page 19