Filter
Top Products
Special Notes 1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
CL408e CL412e CL608e CL612e
Horizontal
aaaa
cccc
0001
to
0832
0001
to
1248
0001
to
1216
0001
to
1984
Default
Vertical
bbbb
dddd
0001
to
1424
0001
to
1424
0001
to
1424
0001
to
2136
Expanded
Vertical
bbbb
dddd
0001
to
9999
0001
to
9999
0001
to
9999
0001
to
9999
Page 5-32 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference