Filter
Top Products
Special Notes 1. <ESC>EX0 is effective until <ESC>AR is sent to reset the printer
to its standard print length, or until the printer is repowered.
2. It may be included in an independent data stream to specify the
size of the maximum print area:
LENGTH CL408e CL412e CL608e CL612e
<ESC>A
<ESC>EX0
<ESC>Z
49.2"
1249 mm
9999 dots
32.8
833 mm
9999 dots
49.2"
1249 mm
9999 dots
32.8"
833 mm
9999 dots
<ESC>A
<ESC>AR
<ESC>Z
7"
178 mm
1424 dots
7"
178 mm
2136 dots
7"
178 mm
1424 dots
7"
178 mm
2136 dots
3. When this command is used with the <ESC>& Store Form
Overlay command the Form length cannot exceed the maximum
specified.
7. If a job contains elements out of the memory range, it is ignored.
8. If the Forms Overlay command <ESC>& is used with Expanded
Memory to expand the print area, the Form Overlay length is still
limited to the maximum..
SATO CL Series “e” Printers PN 9001074 Preliminary Page 5-63
Section 5. Programming Reference