Filter
Top Products
BJFaaaaaaaa Initialize Memory Card. Initializes the Memory Area and formats it for
use. Should be preceded by the Memory Area Select command for the
memory area to be initialized.
aaaaaaaa = 8 character alphanumeric password
Page 5-
BJRabbccdd
eeeeff..f
TrueType Font Recall. Recalls a previously stored bit mapped
TrueType font for use.
a = Font ID (1-9
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Character pitch (01-99)
eeee = Number of characters
ff...f = Data to be printed using font
Page 5-
BJS Expanded Memory Status. Reports the status of the currently active
Memory Card to the host by printing a status label.
Page 5-
BJTaa,bb,cc,
dd,ee,fff,gg..g
TrueType Font Recall. Recalls a previously stored bit mapped
TrueType font for use.
aa = Font ID (01-99
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Reserved, always 00
ee = Character pitch (01-99)
ffff = Number of characters
gg...g = Data to be printed using font
Page 5-
CCa Memory Area Select. Selects the Memory area for all following
Expanded Memory commands.
a = 1 Memory Area 1
b = 2 Memory Area 2
Page 5-
GCaaa Recall BMP Graphic. Recalls BMP graphic files stored in Expanded
Memory.
Page 5-
GIabbbcccddd
ee...e
Store Custom Graphics. Stores a graphic image in the memory card
to be called later for printing on a label.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal8x8blocks
ccc = Number of vertical8x8blocks
ddd = Graphics storage number (001-999)
ee...e = Data to describe the graphic image
Page 5-
GRccc Recall Custom Graphics. Recalls for printing the graphic image
stored by the GI command.
ccc = Storage number (001-999)
Page 5-
Appendix A: Command Quick Reference
SATO CL Series “e” Printers PN 9001074 Preliminary Page A-11
INSTRUCTION DESCRIPTION PAGE