SATO CL412E Printer User Manual


 
Vbbbb Vertical Position. Specifies a field’s vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
Page 5-
WBa Font type. Specifies the 18W x 30L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
WDHaaaaVbbbb
XccccYdddd
Copy Image Area. To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
Page 5-
WKnn...n Job Name. Stores the job name.
nn..n = Job name, up to 16 ASCII characters
Page 5-
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
Page 5-
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
Page 5-
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
Page 5-
XWa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
Z Stop Code. Ends all print jobs. Page 5-
Appendix A: Command Quick Reference
SATO CL Series “e” Printers PN 9001074 Preliminary Page A-7
INSTRUCTION DESCRIPTION PAGE