SATO CL412E Printer User Manual


 
Special Notes 1. Characters may be enlarged through the use of the Character
Expansion command.
2. Character spacing may be altered through the use of the
Character Pitch command. The default is 2 dots between
characters. It is recommended to use a spacing of 5 dots for
OCR-A and 1 dot for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T
Custom-Designed Characters command.
4. A font must be defined for each field to be printed. There is no
default font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and
OB on the SATO M-8400 printer. (Note: These fonts, except the
OA and OB fonts which are fixed in size, will be 33% smaller on
an CL12e and CL612e).
6. The proportionally spaced fonts XU, XS, XM, XL and XA can be
printed with fixed spacing using the <ESC>PS Proportional Space
command.
7. The matrices for the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B
specifications when printed on different resolution printers.
CL408e/CL608e CL412e/CL612e
OA Font 15 dotsWx22dots H 22 dotsWx33dots H
OB Font 20 dotsWx24dots H 30 dotsWx36dots H
SATO CL Series “e” Printers PN 9001074 Preliminary Page 5-37
Section 5. Programming Reference