Filter
Top Products
Expanded Memory Function
Format/Field Store
Command Structure <ESC>YS,aa<ESC>/N,bb,cc{.......}
aa = Format number to be stored (01-99)
bb = Field number to be stored (01-99)
cc = Length of field to be stored (01-99)
{.....} = Command stream describing the field to be stored.
Example: <ESC>YS,01<ESC>/N,01,05
Placement: Immediately after <ESC>CC Memory Area Select
command.
Default: None
Command Function To store a format field description in the memory card.
Printer Input
YS,02 /N,01,13
/N,02,13
Printer Output There is no printer output as a result of this command. See <ESC>YR
Format/Field Recall command.
Special Notes 1. This command requires the Expanded Memory option. See your
SATO representative for details.
2. Each job should be sent individually. If more than one job is sent
in a data stream, only the first one will be accepted and the
remainder ignored.
3. The following commands cannot be stored in a format:
Page 5-90 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference