Filter
Top Products
Special Notes 1. To expand the print length to the maximum limit, the <ESC>EX0
Expanded Print Length command must be used.
CL408e CL412e CL608e CL612e
Maximum Print
Width
aaaa
832
4.1 in.
104 mm
1248
4.1 in.
104 mm
1216
6.0 in.
152 mm
1984 dots
6.5 in.
165 mm
Default Print
Length
bbbb
1424 dots
7.0 in.
178 mm
2136 dots
7.0 in.
178 mm
1424 dots
7.0 in.
178 mm
2136 dots
7.0"
178mm
Expanded with
<ESC>EX0
bbbb
9999 dots
49.2 in.
1249 mm
9999 dots
32.8 in.
833 mm
9999 dots
49.2 in.
1249 mm
9999 dots
32.8 in.
833 mm
(1) Limited by the number of digits in the command field.
2. If any part of an image is placed past the maximum number of
dots, that part of the image will be lost.
3. If any part of an image is placed past maximum allowable dots
across the label, that part of the image will be lost.
4. If you attempt to print where there is no paper, you may damage
the print head.
5. For these commands, the leading zeroes do not have to be
entered. The command V1 is equivalent to V0001.
SATO CL Series “e” Printers PN 9001074 Preliminary Page 5-65
Section 5. Programming Reference