Filter
Top Products
Getting Started
4
1
7.
Main Power Switch
Do not touch this switch. This switch
should be only used by a service repre-
sentative.
Note
❒ If the operation switch is on and there
is still no power, turn on the Main
Power switch.
❒ If you leave the Main Power switch
off for more than an hour, all files in
memory are lost. ⇒ Chapter 10,
"When Power is Turned off or Fails" in
the Advanced Features manual
❒ The On indicator blinks when:
• The platen cover or document
feeder (ADF) is open.
• Communicating with other desti-
nation machines.
• The hard disk is running.
8.
Handset/External Telephone (Op-
tion)
9.
Operation Switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). ⇒ P.8 “Turning On the
Power”
10.
Internal Tray 2
Fax messages are delivered here when re-
ceived. The Internal tray 2 allows you to
distinguish fax messages from copied or
printed paper that are delivered to other
trays. The indicator beside the Internal
tray 2 is lit when the Internal tray 2 con-
tains fax messages or printouts. ⇒Chap-
ter 1, "Printing a Received Fax" in the
System Settings
Rear View
1.
Bypass Tray
Select this tray for non-standard size pa-
per.
⇒ "Copying from the Bypass Tray" in the
Copy Reference
⇒ Chapter 5, "Having Incoming Messag-
es Printed on Paper From the Bypass
Tray" in the Advanced Features manual
2.
Analog Line Connector
⇒ Appendix, "Connecting the Machine
to a Telephone Line and Telephone" in
the Advanced Features manual
AdonisC2_EN_b-f_FM.book Page 4 Tuesday, January 23, 2001 4:45 PM