Filter
Top Products
Getting Started
8
1
Starting the Machine
To start the machine, turn on the op-
eration switch.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use the machine
for a while. ⇒ "Energy Saver Tim-
er", "Auto Off Timer" in the Copy
Reference
-
--
-Power switches
This machine has two power switch-
es: ⇒ P.3 “Guide to Components”
❖
❖❖
❖ Operation switch
Turn on this switch to activate the
machine. When the machine has
warmed up, you can make copies
or send faxes.
❖
❖❖
❖ Main power switch
Do not touch the Main Power
switch. It should be used only by a
service representative when the
optional fax unit is installed.
Important
❒ If you leave the Main Power
switch off for more than one hour,
all fax files in memory are deleted.
See "Turning Off The Power" be-
low.
Turning On the Power
A
Confirm that the power cord is
plugged into the wall outlet firm-
ly and the Main Power switch is
on.
B
Confirm that the Main power
switch is on.
C
Turn on the operation switch. The
On indicator should light.
The panel display will turn on.
AdonisC2_EN_b-f_FM.book Page 8 Tuesday, January 23, 2001 4:45 PM