Filter
Top Products
Faxing
22
2
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A
Press [Exit].
B
Remove the original and replace it on the exposure glass.
C
Press the {
{{
{Start}
}}
} key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
❒ If the machine still cannot detect the original size, the following display is
shown:
❒ If this happens, carry out the following steps.
• Press the key to switch the scan size.
• Press the {Start} key again.
AdonisC2_EN_b-f_FM.book Page 22 Tuesday, January 23, 2001 4:45 PM