Filter
Top Products
Error Messages and Their Meanings
75
4
Error Messages and Their Meanings
If there is an error, one of the following messages may appear on the display. It
might just flash briefly, so if you are watching for errors, stay by the machine and
check the display.
Message Problem and Solution
Put original back, check it and press [Start]. Original jammed during Memory Transmis-
sion. Reset originals that have not been
scanned.
Error occurred, and transmission was can-
celed.
A document jam occurred during Immediate
Transmission. Press
[OK]
and re-send the page
which has been not sent.
An error occurred during Immediate Trans-
mission. Press
[OK]
and re-send the original.
Note
❒
There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
Cannot detect original size. Place original
again, then press [Start].
The machine failed to detect the size of the
original. Reset originals and press the
{Start}
key.
L
Call Service
Functional problems with facsimile. Please call
service.
There is a problem with the fax function.
Record the code number shown in the display
and contact your service representative. The
copier function will still work normally.
Memory is full. Cannot scan more. Transmit-
ting only scanned pages.
If you press
[OK]
, the machine returns to the
standby mode and starts transmitting pages
which has been scanned.
AdonisC2_EN_b-f_FM.book Page 75 Tuesday, January 23, 2001 4:45 PM