Filter
Top Products
Faxing
42
2
-
--
-Restrictions When Dialing with
the Number Keys
Fax numbers entered with the num-
ber keys are programed in internal
memory (separate from memory for
storing original data). Therefore, you
cannot program more than 100 num-
bers , total, with the number keys for
the following:
• Destinations specified in a Memo-
ry Transmission (including Confi-
dential Transmission and Polling
Reception)
• Transfer Stations and End Receiv-
ers specified in a Transfer Request
• Destinations and Transfer Stations
specified in a Group
• Destinations specified in program
registration
For example, when 90 destinations
are programed in a Group with the
number keys, only 10 destinations
can be dialed for Memory Transmis-
sion from the number keys.
Note
❒ When this machine is requested to
transfer a call (i.e. become a Trans-
fer Station), 2 fax numbers are au-
tomatically programed. Therefore,
the number of destinations that
can be dialed from the number
keys decreases by two whenever
this machine is requested to trans-
fer a call.
❒ When a total of 100 fax numbers is
programed, only Immediate
Transmission is allowed.
❒
If a memory file is awaiting trans-
mission and the
"Memory is full
and you cannot enter with num-
ber keys"
message is displayed
when dialing with the number keys,
you cannot dial any more numbers.
This is because fax numbers have
been dialed with the number keys
for some of the files awaiting trans-
mission. When these files have been
sent and their fax numbers are delet-
ed from memory, additional fax
numbers can be dialed.
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers are
programed in separate memory,
dialing fax numbers with the num-
ber keys does not change the per-
centage on the display.
Pause
Press the {Pause/Redial} key when di-
aling or storing a number to insert a
pause of about two seconds.
Limitation
❒ You cannot insert a pause before
the first digit of a fax number.
Note
❒ A pause is shown as a "-" on the
display.
❒ You can insert pauses in numbers
programed in Quick Dials.
AdonisC2_EN_b-f_FM.book Page 42 Tuesday, January 23, 2001 4:45 PM