Filter
Top Products
Faxing
38
2
❒ By default, the machine returns to
the Original Type home setting af-
ter every transmission. You can
change this with the [Gen. Settings/
Adjust] key. ⇒ Chapter 7, "General
Setting/Adjustment" in the Ad-
vanced Features manual
A
Press [
Original Type
].
B
Select the original type you re-
quire.
C
Press [OK].
Image Density (Contrast)
The text and diagrams in your origi-
nal should stand out clearly from the
paper they are written on. If your
original has a darker background
than normal (for example, a newspa-
per clipping), or if the writing is faint,
adjust the image density.
❖
❖❖
❖ Auto Image Density
The appropriate density setting for
the original is automatically select-
ed.
❖
❖❖
❖ Manual Image Density
Use manual image density, to set
image density yourself.
❖
❖❖
❖ Combined Auto and Manual Image
Density
You can adjust image density for
only photographs, illustrations or
diagrams when the original has a
dark background.
Note
❒ When the machine is turned on or
modes are cleared, the image den-
sity is set to Auto Image Density.
You can change this with the [Gen.
Settings/Adjust] key. ⇒ Chapter 7,
"General Setting/Adjustment" in
the Advanced Features manual
❒ By default, the machine returns to
the Auto Image Density home set-
ting after every transmission. You
can change this with the [
Gen. Set-
tings/Adjust] key. ⇒ Chapter 7,
"General Setting/Adjustment" in
the Advanced Features manual
AdonisC2_EN_b-f_FM.book Page 38 Tuesday, January 23, 2001 4:45 PM