Filter
Top Products
Dialing
43
2
Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the {Tone}
key, the machine dials the number us-
ing tonal signals.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the {Tone} key.
Note
❒ A tone is shown as a "•" on the dis-
play.
-
--
-Using the {Tone} key with On
Hook Dial
A Press the {On Hook Dial} key.
B Enter the fax number with the
number keys.
C Press the {Tone} key.
-
--
- Sending Tonal Signals by ISDN
(Optional ISDN Unit Required)
You can still send tone signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
❒ This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On-hook Dial or Man-
ual Dial.
Quick Dials
When you have programed a destina-
tion's number in a Quick Dial table,
you can dial the number by just se-
lecting the destination from Quick
Dial table.
Additionally, you can store a name
that will appear on the display when-
ever you press that Quick Dial.
Preparation
You must program the fax number
of destination for the Quick Dial
table prior to using Quick Dial.⇒
P.54 “Programing Quick Dials”
Note
❒ To check the contents of Quick Di-
al, print the destination list. ⇒
Chapter 7, "Reports/Lists" in the
Advanced Features manual
Reference
⇒ P.41 “Dialing”
AdonisC2_EN_b-f_FM.book Page 43 Tuesday, January 23, 2001 4:45 PM