Filter
Top Products
Setup
64
3
H
Press [Exit] twice.
The machine will return to standby
mode.
-
--
-Programing the Group as a
Transfer Station of a Multi-step
Transfer
A Group can be programed as a
Transfer Station of a Multi-step
Transfer. You should program the re-
ceiving stations when you program
the group as a Transfer Station.
For more information, contact your
service representative.
A Follow step A to F in "Programing
Groups".
B Press [Adv. Features].
C
Press [Transfer Req.].
D Press [
Receiving Station
].
E Specify the receiving station.
Note
❒ When you specify the receiving sta-
tion with Quick Dial, press [
Quick
Dial
] and enter the Group Dial
number using the number keys.
❒ When you specify the receiving sta-
tion with Group Dial, press [
Group
Dial
] and enter the Group Dial
number using the number keys.
F After specifying all of the receiving
stations, press [OK].
G Press [Exit].
Reference
⇒ Chapter 5, “Reception Func-
tions” in the Advanced Features
manual
Editing Groups
Change the Groups already pro-
gramed.
Limitation
❒ When a programed Group is being
used for a standby Memory Trans-
mission, the message
"Specified
destination is used by trans-
mission standby file. It can-
not be changed or deleted.
Specify it again after trans-
mission is completed."
is
shown. You cannot change the des-
tination for this key.
A
Press [Dest. Management].
B
Select
[
Program/Change/Delete Group
]
.
AdonisC2_EN_b-f_FM.book Page 64 Tuesday, January 23, 2001 4:45 PM