Filter
Top Products
Dialing
45
2
Groups
If you frequently send the same mes-
sage to more than one place, program
these numbers into a Group. Then
you can send the messages to all the
destinations in that Group with just a
few keystrokes. You can also pro-
gram a name for the Group (for exam-
ple, "Branch Offices") which will be
displayed before you press the {Start}
key.
Preparation
You need to program the Groups.
⇒ P.62 “Programing Groups”
Limitation
❒ Group Dial can be used only for
Memory Transmission; it cannot
be used for Immediate Transmis-
sion. The machine automatically
changes to Memory Transmission
when you use Group Dial.
Note
❒ To check the contents of the
Groups, print the list. ⇒ Chapter 7,
"Group Dial List" in the Advanced
Features manual
❒ A total of 500 destinations pro-
gramed for Group Dial.
A
Set your original and select any
scan settings you require.
B
Press [Group].
C
Press the group key for the de-
sired group.
A programmed destination and
the total number of destinations is
displayed. Press [U
UU
U Prev.] or [T
TT
T
Next] to see the other destination.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and start again.
AdonisC2_EN_b-f_FM.book Page 45 Tuesday, January 23, 2001 4:45 PM