Filter
Top Products
Solving Problems
77
4
Solving Problems
This table lists some common problems and their solutions.
Problem Solution Refer to
Image background appears
dirty when received at the
other end.
Adjust the scan density.
⇒
P.38
“Image Density (Con-
trast)”
Printed or sent image contains
spots.
The Document Feeder (ADF)
or exposure glass is dirty.
Clean them.
⇒
the Copy Ref-
erence manual
Make sure that ink or correc-
tion fluid is dry before setting
the original.
---
Received image is too light. Request the sender to increase
the image density.
---
When using moist, rough or
processed paper, the printed
image may be partly invisible.
Only use recommended pa-
per.
⇒
Appendix, "Acceptable
Types of Originals" in the Ad-
vanced Features manual
When
D
appears on the dis-
play, toner is beginning to run
out. Replace the toner car-
tridge soon.
⇒
the Copy Ref-
erence manual
---
Message appears blank at the
other end.
The original was set upside
down. Set it properly.
⇒
P.16
“Setting Originals”
You want to cancel a Memory
Transmission.
If the original is being pro-
gramed, press the
{Clear/Stop}
key.
⇒
P.29
“Canceling a Memory
Transmission”
If the original is being sent,
use "Change/ Stop TX File".
⇒
Chapter 2, "Checking and
Canceling Transmission Files"
in the Advanced Features
manual
You want to cancel an Imme-
diate Transmission.
Press the
{Clear/Stop}
key.
⇒
P.29
“Canceling a Memory
Transmission”
You cannot add any destina-
tions in a Group at though the
number of destinations has
not reached the maximum.
100 destinations have been
programmed with the num-
ber keys (1000 with the op-
tional Expansion Memory).
Program more numbers with
Quick Dials or Speed Dials.
⇒
P.41
“Dialing”
AdonisC2_EN_b-f_FM.book Page 77 Tuesday, January 23, 2001 4:45 PM