Filter
Top Products
Faxing
26
2
Note
❒ Do not open the Document
Feeder (ADF) while it is scan-
ning originals.
After scanning, the machine will
return to standby mode.
Sending Originals from the
Exposure Glass
A Set the first page of your origi-
nal on the exposure glass face
down.
B Dial.
C Select any scan settings you re-
quire.
D Press the {
{{
{Start}
}}
} key.
The machine starts scanning the
original.
E Set the next original on the ex-
posure glass within 60 seconds
after the machine has finished
scanning the first original.
Note
❒ Repeat steps C to E for all
pages.
F Set the last original then press
[#
##
#].
G Press the {
{{
{Start}
}}
} key.
The machine calls the destina-
tion.
-
--
- Checking the Transmission
Settings
You can check the transmission set-
tings (e.g. destination and transmis-
sion mode) on the display.
A Press the {Check Modes} key.
The following display appears.
B After checking the settings on the
display, press the {Check Modes}
key.
This returns the display to the dis-
play shown before pressing the
{Check Modes} key the first time.
AdonisC2_EN_b-f_FM.book Page 26 Tuesday, January 23, 2001 4:45 PM