Filter
Top Products
Faxing
18
2
B
Close the Document Feeder (ADF).
Note
❒ When sending a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from rising.
-
--
-Bound Original Page Order
When sending bound originals
(books, magazines, etc.), you can
choose to have either the left page or
right page sent first. ⇒ Chapter 4,
"Book Fax" in the Advanced Features
manual
Note
❒ The default setting is Send Right
Page first. ⇒ Chapter 8, "Changing
the User Parameters" in the Ad-
vanced Features manual
Setting Originals in the
Document Feeder (ADF)
Use the Document Feeder (ADF) to
scan in a stack of originals in one op-
eration. The Document Feeder (ADF)
can handle both single-sided and
double-sided originals.
Limitation
❒ The maximum document length is
1200mm (47").
❒ Place all the originals to be sent in
a single stack.
❒ You cannot set originals in the
Document Feeder (ADF) one page
at a time or in sheaves.
❒ Do not open the Document Feeder
(ADF) while it is scanning the orig-
inals or a document could become
jammed.
Note
❒ If you send documents longer than
420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might be damaged because scan-
ning will not stop. ⇒ P.20 “Setting
a Scan Area” ⇒ Chapter 8, " Chang-
ing the User Parameter " in the Ad-
vanced Features manual
❒ Documents longer than 420mm
(17") must be sent by memory
transmission (immediate transmis-
son is not possible).
❒ If an original jams, press the {Clear/
Stop} key then remove the original
carefully.
❒ If your original is bent or folded,
flatten it before you set it.
❒ Set thin originals on the exposure
glass.
AdonisC2_EN_b-f_FM.book Page 18 Tuesday, January 23, 2001 4:45 PM