Filter
Top Products
15
2. Faxing
Overview
Changing Memory
Transmission and Immediate
Transmission
The basic procedure to send a fax
message is:
A Make sure the Facsimile indicator
is lit
B Set your original
C Dial the number
D Press the {Start} key
The rest of this section describes these
steps and the various features that are
available in more detail.
There are two ways to send a fax mes-
sage:
• Memory Transmission
• Immediate Transmission
Check the display to see which mode
is correctly active. You can change the
transmission mode by pressing
[Immed. TX] or [Memory TX].
AdonisC2_EN_b-f_FM.book Page 15 Tuesday, January 23, 2001 4:45 PM