Filter
Top Products
Memory Transmission
27
2
Broadcasting
Send the same messages to several
destinations.
Note
❒ Maximum number of destinations
per Broadcasting: 500
❒ Combined total number of desti-
nations that can be set: 500
❒ The number of destinations that
can be set using the number keys
varies according to the machine's
memory usage. The maximum
number is 100 or 1000 when the
operational Expansion Memory is
installed. ⇒ P.42 “Restrictions
When Dialing with the Number Keys”
A
Make sure that Memory Trans-
mission is selected.
If it is not, press the [Memory TX]
key.
B
Set the original.
Limitation
❒ You can send the first pages
from the exposure glass then
the remaining pages from the
Document feeder (ADF). After
you remove the last page from
the exposure glass, you have 60
seconds to insert the remaining
pages in the Document Feeder
(ADF).
❒ Note that you cannot set pages
on the exposure glass after you
have started using the Docu-
ment Feeder (ADF).
Note
❒ To scan multiple page originals
from the exposure glass, place
them page by page.
❒ The original can be placed at ei-
ther place until you press the
{Start} key. ⇒ P.16 “Setting
Originals”
C
Select any settings you require.
Reference
⇒ P.20 “Setting a Scan Area”
D
Dial a destination.
If you make a mistake, press the
{Clear/Stop} key and enter the cor-
rect number again.
Reference
⇒ P.20 “Setting a Scan Area”
⇒ Chapter 4, "Chain Dial" and
"Redial" in the Advanced Fea-
tures manual
AdonisC2_EN_b-f_FM.book Page 27 Tuesday, January 23, 2001 4:45 PM