Filter
Top Products
Names and Functions of Control Panel
7
1
Names and Functions of Control Panel
This illustration shows the control panel when options are installed.
1. {
{{
{User Tools/Counter}
}}
} key
Use to change default or operation pa-
rameters according to the operating con-
ditions.
2. Display
Shows the operation status and messag-
es.
3. {
{{
{Check Modes}
}}
} key
Press to check the current settings.
4. {
{{
{Clear Modes}
}}
} key
Press to clear the current settings.
5. {
{{
{Energy Saver}
}}
} key
Press this key for about one second to be-
gin warm-up.
Pressing this key again while in warm-up
mode cancels warm-up.
Note
❒ This key is inactive while scanning or
setting scanner defaults.
6. Main power indicator and power
indicator
The main power indicator lights up when
the main power switch is set to on. The
power indicator lights up when the ma-
chine is on.
Important
❒ Do not turn off the main power
while the power indicator is lit or
blinking. Doing so may cause a
failure of the hard disk.
7. Operation switch
Press this switch to turn the machine on.
The power indicator lights up. To turn
the machine off, press this switch again.
Note
❒ This key is inactive while setting scan-
ner defaults.
8. Indicators
Show errors and machine status.
d: Add Staple indicator
D: Add Toner indicator
B: Add Paper indicator
L: Service Call indicator
M: Open Cover indicator
x: Misfeed indicator
Reference
For more information, see General
Settings Guide.
ZHSS010E