Filter
Top Products
Appendix
88
8
Sender's name is not selected. Sending E-mail has been
cancelled.
A sender's name should be specified
before sending e-mail. Send e-mail
after specifying the sender's name.
Sending the data has been cancelled due to containing
some deleted file(s). Try again after checking the stored
files.
After the files were selected, some
files were deleted with DeskTop-
Binder V2 Lite/Professional. Per-
form the selection process again.
Sending the data has failed. Insufficient memory in
SMTP server.
There is not enough free space on the
hard disk of the SMTP server. Free
up the required amount.
Sending the data has failed. Insufficient memory in the
delivery server.
There is not enough free space on the
hard disk of the delivery server. Free
up the required amount.
Sending the data to SMTP server has failed. The data
will be resent later.
A network error has occurred and a
file was not sent correctly to the
SMTP server. Wait until delivery is
retried automatically after the preset
interval. If the delivery fails again,
consult the network administrator.
Sending the data to SMTP server has failed. To confirm
the result, check [Scanned Files Status].
While a file was being sent to the
SMTP server, a network error oc-
curred and the file could not be sent
correctly. Try the operation once
more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.60 “Checking the Status of De-
livery” and p.49 “Checking the Sta-
tus of E-mail”.
Sending the data to the delivery server has failed. To
confirm the result, check [Scanned Files Status].
While a file was being sent to the de-
livery server, a network error oc-
curred and the file could not be sent
correctly. Try the operation once
more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.60 “Checking the Status of De-
livery”.
Message Causes and Solutions