Setting Originals
36
3
One-sided original/Two-sided
original selection
A When scanning one-sided orig-
inals, make sure that [2 Sided
Original] is not selected.
B
When scanning two-sided orig-
inals, press
[2 Sided Original]
to
select
[2 Sided Orig.: T to T]
or
[2
Sided Orig.: T to B]
according to
the binding orientation of the
original.
Note
❒ When the last page of two-
sided originals is blank, se-
lect [1 Side] to skip that side
and finish scanning, or select
[2 Sides] to scan that side as a
blank page.
❒ If [
1 Side
] is selected for the last
page when scanning originals
in several batches, the maxi-
mum number of pages per file
may decrease depending on
the number of batches set.
❒ If [1 Side] is selected for the
last page, the image size
might become larger than
original and may exceed the
maximum e-mail size possi-
ble. In this case, change the
settings of [Max. E-mail Size] in
scanner settings. See p.11
“Initial Scanner Setup”.
❒ When scanning originals on
the exposure glass with the [
2
Sided Original
] setting, set [
1 Sid-
ed Original
] for the last original.
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original or .
Reference
p.31 “Specifying Original
Orientation and Setting Orig-
inals”
SADF/Batch selection
A When scanning a large number
of originals using the ADF by
dividing the originals and
scanning them individually or
in batches, check that [SADF] or
[Batch] is selected.
Note
❒ Select [SADF] for adding orig-
inals one by one, or select
[Batch] for adding the origi-
nals in batches.
❒ Select whether [
SADF
] or [
Batch
]
is displayed using the initial
scanner setting [
Switch to Batch
].
Mixed size selection
A When originals of different
sizes are placed, make sure that
[Mixed Size] is selected.
Note
❒ If [Mixed Size] is not selected,
the maximum size detected
is set as the scan size. For
originals smaller than this
size, a blank space will ap-
pear in the resulting image.
Top to top
original:
Top to bot-
tom original:
RS
RS
R
S
S
R