Filter
Top Products
Sending a Fax Message
82
2
duced to a suitable width during
transmission.
Important
❒
If you turn this feature off, the
scale of the document is main-
tained and some parts of the image
may be lost when printed at the
other end.
Note
❒
You can switch this feature on and
off with the User Parameters(
⇒
P.236). The default setting is on..
Duplex Original Settings
This feature lets you scan in each side
of a double-sided document, then
have both sides sent in a single opera-
tion.
Preparation
You need to store the Duplex Orig-
inal function in a User Function
key beforehand.
Limitation
❒
This feature is only available with
Memory Transmission.
A Make sure the Memory Transmis-
sion indicator is lit.
Note
❒
If it is not, press the
{
Transmis-
sion Mode
}
key.
B Press the
{
User Function
}
key with
the Duplex Original function
stored in it.
C Set your double-sided document
with the front page face-up.
D Adjust any scan settings as neces-
sary.
E Dial the destination number.
F Press the
{
Start
}
key.
Scanning of the front page will be-
gin.
When scanning has finished, the
following display will appear:
G Set your document with the back
page face-up.
AB
BA
GFREDU0N
Transmitter
(This machine)
Receiver
Reduction
A
A
GFREDU1N