Filter
Top Products
Dialing
69
2
Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the User
Function key assigned with the Tone
feature, the machine dials the number
using tonal signals.
Preparation
You need to assign the Tone fea-
ture to a User Function key before-
hand.
Limitation
❒
You cannot place a tone before the
first digit of a fax number.
❒
Some services may not be available
when using the Tone feature.
Note
❒
A tone is shown as a “ • ” on the
display.
❖
Sending tone signals by ISDN (ISDN
option Required)
You can still send tone signals to a
G3 user even if the machine is only
connected to an ISDN line.
Note
❒
This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using Manual Dial. When
only connected to ISDN, you can
use On Hook Dial.
SUB Code Transmission
Normally you can only use Confiden-
tial Transmission or Transfer Request
to send to fax machines of the same
make that have the Confidential Re-
ception or the Transfer Request fea-
ture. However, if the other machine
supports a similar feature called
SUB/SID, you can send fax messages
to the other party using this method
instead.
You can also use SUB code Transmis-
sion to send messages to Personal
Boxes and Transfer Boxes registered
in other fax machines.
Preparation
You need to assign the Dial Option
feature to a User Function key be-
forehand.
You can only use this feature in a
G3 communications (not with G4).
You cannot use Chain Dial with
this feature.
Note
❒
The ID can be up to 20 digits long
and consist of digits, spaces, * and
#.
❒
Make sure the ID matches the
specification of the fax you are
sending to.
❒
You can store IDs in Quick Dials,
Speed Dials, Groups and Pro-
grams.
❒
Messages you send using this fea-
ture are marked “SUB” on the re-
ports below:
• File Reserve Report (Memory
Transmission)
• File Reserve Report (Polling Re-
ception)
• Communication Result Report
• Communication Failure Report
• Transmission Result Report
A Set your document and make any
changes to the scan settings if nec-
essary.