Filter
Top Products
Memory Transmission
51
2
can check the result of the transmis-
sion. If two or more destinations are
specified, this report is printed after
the fax message has been sent to all
the destinations. If the machine is set
up not to print this report and the fax
message could not be successfully
transmitted, the Communication Fail-
ure Report is printed.
⇒
P.51
“Com-
munication Failure Report”
Note
❒
By default this function is turned
on so you need to turn it off.
⇒
P.236
“Changing the User Parame-
ters”
❒
You can choose whether to include
part of the document image on the
report (by default, part of the im-
age is printed).
⇒
P.236
“Changing
the User Parameters”
Communication Failure Report
This report is only printed if the Com-
munication Result Report is turned
off and a message could not be suc-
cessfully transmitted with Memory
Transmission. Use it to keep a record
of failed transmissions so you can
send them again.
Note
❒
You can choose whether to include
part of the document image on the
report (by default, part of the im-
age is printed).
⇒
P.236
“Changing
the User Parameters”