Filter
Top Products
Sending a Fax Message
60
2
When only connecting to an ISDN
line, the On Hook Dial feature be-
comes available for ISDN.
The following example describes how
to use this feature to connect to a fax
information service.
Limitation
❒
You cannot use the optional hand-
set or an external telephone with
this function.
A Press the
{
On Hook Dial
}
key.
B Dial the fax number.
Limitation
❒
Do not pause for more than 5
seconds between dialing digits.
If more than 5 seconds passes,
transmission will start automat-
ically.
Note
❒
If you make a mistake, press the
{
On Hook Dial
}
key or the
{
Clear
Modes/Energy Saver
}
key and
perform the operation again.
❒
You can also enter the sub-ad-
dress and UUI. The correct in-
put sequence is as follows:“Fax
number” “/” Subaddress” “•”
“UUI”
C Press
[
Dialing
]
.
Note
❒
Transmission will begin auto-
matically 5 seconds after enter-
ing the fax number.
D Follow the instructions provided
by the other party.
E When you hear a message such as
“Please press the start button”,
press the
{
Start
}
key.
After a while, reception will begin.
When reception has finished, the
machine will return to standby
mode.
Note
❒
If you wish to cancel reception
while it is in progress, press the
{
Stop
}
key.