Filter
Top Products
Setup
19
1
C Prepare the new paper, then in-
sert it under the left and right
metal brackets as shown.
Important
❒
Do not load a stack of paper that
exceeds the limit mark.
Limitation
❒
You can set up to 500 sheets in
the paper unit.
D Gently return the paper unit to its
original position.
Adjusting Initial Settings
After you turn the machine on for the
first time, you need to register the fol-
lowing settings:
• language
• Date and Time
• RTI and TTI
• Line type and CSI
Switching Language
If your native Language is Spanish or
French, you can have the messages
that appear on displays, lists and re-
ports shown in either of these lan-
guages instead of in English. Follow
the procedure below to change be-
tween the three languages.
Note
❒
Make sure that machine is in
standby mode before following
this procedure. If the standby dis-
play is not shown when you start,
the display may become tempo-
rarily jumbled up.
A Make sure that the machine is in
standby mode.
Note
❒
If the “Fax Features” or “Key
Op. Tools” screen is shown,
press the
{
User Tools
}
key. If any
other display is shown, press
the
{
Clear Modes/Energy Saver
}
key.
B Press the
{
User Tools
}
key.
C Press
[
Language
]
.