Filter
Top Products
Handy Functions
27
1
Adjusting the Printing Density
You can economize on toner by ad-
justing the image density used when
generating all printed output (Output
Density), or for just incoming faxes,
reports and lists (Toner Saving).
Output density
This setting specifies the image densi-
ty used for printing incoming faxes,
reports, lists and copies.
Three levels are available: Dark, Nor-
mal, Light.
Note
❒
When the machine is shipped, the
default setting is Normal. You can
change this with the User Parame-
ters.
⇒
P.236
“Changing the User Pa-
rameters”
Toner saving
Use this feature to save on over 50%
of the toner used for printing incom-
ing faxes, reports and lists.
Limitation
❒
This feature does not apply to cop-
ies, or prints made with the printer
option. However, the optional
Printer Interface has its own toner
saving function.
❒
If this feature is turned on, it inval-
idates the Output Density feature
and image density is fixed at Nor-
mal.
Note
❒
When Toner Saving is turned on,
printed images will come out light-
er than usual. To check on the im-
age quality, print out the User
Parameter List.
⇒
P.242
“Printing
the User Parameter List”
❒
If the other party sends you a fax
using the Photo (Halftone) setting,
the printed fax image may differ
from the document image.
❒
When receiving faxes sent using
Photo (Halftone) mode from this
maker's machines, turn Toner Sav-
ing off.
❒
When the machine is shipped,
Toner Saving is turned off by de-
fault. You can turn Toner Saving
on or off with the User Parameters.
⇒
P.236
“Changing the User Param-
eters”
Boxes
The following functions are for deliv-
ery and transfer of messages:
• Personal Box
• Information Box
•Transfer Box
By using SUB and SEP codes with
these functions, you can send mes-
sages to another party's box and re-
trieve messages stored in boxes.
For how to set up these functions, see
P.289
“Box Settings”
.
For how to print out and delete mes-
sages stored in boxes, see P.154
“Box
File Manager Functions”
.
Note
❒
The combined total of items that
can be stored with the Personal
Box, Information Box and Transfer
Box features is 150. Installing the
optional Function Upgrade Card
increases this capacity to 400 items.
❒
SUB and SEP codes can be up to 20
digits long and contain digits,