Filter
Top Products
Sending Confidential Messages
7
1
Sending Confidential Messages
This feature is called Confidential
Transmission. Use this feature if you
do not want your message to be
picked up casually by anybody at the
other end. The message will be stored
in the memory at the other end. It will
not be printed until the Confidential
ID is entered.
There are two types of Confidential
Transmission:
❖
❖❖
❖ Default ID
The other party can print the mes-
sage by entering the ID that was
previously stored in the other par-
ty's terminal using the Confiden-
tial ID feature.
❖
❖❖
❖ ID Override
If you wish to send a confidential
message to a particular person at
the other end, you can specify the
Confidential ID that person has to
enter to see that message. Any-
body entering the machine's Confi-
dential ID will not be able to see
the message. Before you send the
message, do not forget to tell the
intended receiver what code must
be entered to print the message.
Limitation
❒ The destination machine must be
of the same make and have the
Confidential Reception feature.
Note
❒ We recommend that you program
the Confidential ID beforehand.
See p.199 “Registering ID Codes”.
❒ An ID can be any 4 digit number
except 0000.
❒ The destination machine must
have enough memory available.
A
AA
A
Set the original and select any
scan settings you require.
B
BB
B
Press [Mode].
The Transmission Mode menu ap-
pears.
C
CC
C
Enter the code for "Confidential
TX" with the number keys.
GFSINS0N
Transmitter
Receiver
Entering the Confidential ID