Filter
Top Products
Communication Information
38
2
F
FF
F
Press [Exit].
The "Information" menu is shown
again.
Note
❒ To print another file, select the
file by pressing the 0 or 1 key,
then repeat the same steps.
G
GG
G
Press [Exit].
The standby display is shown.
Checking and Editing a File
Use this procedure to check or edit
destination(s), check options selected
or alter the transmission time.
This function can be performed for
the files produced by Memory Trans-
mission, Confidential Transmission,
Transfer Request and Polling Recep-
tion.
You can check or change the follow-
ing items:
• Destination List
This list shows all the destinations
specified for the transmission.
• Changing a destination
You can change or edit the destina-
tions of the file. However, you can-
not change the destinations of files
for Transfer Request or Confiden-
tial Transmission.
• Changing the transmission time/
Re-sending a file
You can alter the transmission
time. Also, if there are any failed
transmission files in Memory
Transmission, you can choose to
resend them.
Preparation
Be sure to set the File Retention
function to either "24 hours" or "72
hours" to resend the failed trans-
mission files beforehand. See p.201
“File Retention”.
Note
❒ You cannot set or change the trans-
mission time, or delete or add des-
tinations when the file is being sent
or received.
❒ Files that have been received by
Transfer Request from other Re-
questing Parties cannot be viewed
or edited.